• Chromate Test Kit
• Fluoride Test Kit
• Conductivity Meter
• ORP Probe Standardised Solutions
• pH & ORP Probes
• pH Meter
• pH Probe Calibration Solutions

Description:
Use for measuring chromate in the range 3 - 100 mg/L. 

Method: 
Immerse test strip in sample.  Compare colour change to reference chart to determine concentration.

Applications:
Use for controlling water flow to chromate rinse tanks & to monitor water discharged to sewer to ensure compliance.

Description:
Measures fluoride in the
range 0 - 1.5 mg/L. 

Method: 
Dilute sample 1/10 or 20 to bring into range of test method.  Add a buffer & tablet. Compare colour change to reference disc in a comparator to determine F concentration.

Applications:
Monitor water discharged to sewer to ensure compliance.

Description:
Quality, immersion type industrial grade probes with 5 m cable & BNC connector. Plastic body, sealed & gel filled.
Dimensions,12 mm Ø x 150 mm long.

Applications:
For aggressive industrial applications across the full pH & ORP range.  Suitable for most trade waste applications.

Probe Holders:
Constructed from heavy duty ABS pipe.  Flange mount or bracket mount ensures secure fit even in turbulent 
applications. Compression seal around  probes ensure water tight seal. Length  0.5 - 2.0 metres - specify required length when ordering.

Description:
Quality conductivity meter, measurement
range: 0-2,000 Us/cm (tap water is
about 400 Us/cm).

Applications:
Measure the dissolved salts level in the acid, 
phosphate & chromate rinse tanks. If conductivity is high, increase water flow to reduce salt level - best way to determine how much fresh water should be added to the rinse tanks.

Description:
Quality standardised solutions in 
500 mL bottles.  Coloured coded for 
easy reference.  Available in pH 4.0 (red), pH 7.0 (green) & pH 10.0 (blue).

Applications:
Calibration of pH probes.  Calibrate pH probes weekly

Description:
Quality standardised solutions, coloured coded for easy reference.

Applications:
Used to check accuracy of ORP (or redox) probes which are used in trade waste plants when chromate treatment is required.   Probes should be checked monthly. 

Description:
Quality pH meter with 2 point calibration
(use pH 4 & 7 buffers) for improved accuracy.

Applications:
Monitor chromate & rinse tanks and water discharged to sewer. Use to check accuracy of process pH meters.